SE Electronics DM1 Pre Microphone
Description
DINAMYT DM1
Explosive level for all your passive microphones
An ultra-slim active online preamp that perfectly fits between the microphone and the microphone preamp, providing a huge, clean, transparent gain of +28 dB for all your dynamic and passive tape microphones.
Recommended use
Dynamic and passive tape microphones
Details
High quality Sophisticated Class A and FET design specially selected for non-coloring signal reinforcement
- Much lower output impedance and almost half the noise of any other product on the market to raise the level of any microphone clearly.
- Always a consistent +28 dB regardless of the connected load to allow microphones with a lower output
- Provides an improved level to a preamp, all without adding noise or color, giving new life to your favorite passive microphones.
- The all-metal housing and premium finish ensure that the DM1 can handle demanding lifestyles on tours or in recording/transmission studios.
Gold-plated XLR connector for reliable and lossless signal connection
Specs
Power
· Electrical impedance135 ohms
- Recommended load impedance>1k ohms
- Connectivity 3-pin male/female XLR connector
· Phantom power 48 V (P48 according to IEC 61938)
Sound
Frequency range 10 Hz - 120 kHz (-0.3 dB)
- win28dB
- Current consumption3.0 mA
- Maximum output level (0.5% THD) 8.3 dBV (2.6 V)
- Output noise level9 µV (A-weighted)
Input impedance10k ohms
Dimensions
· Preamp diameter 19 mm (0.75 in.)
- Preamp length 96 mm (3.78 in.)
· Preamp weight 96 mm (3.78 in.)
what's in the box
DM1
It's Logo Sticker
User manual with warranty card.
