SE Electronics DM2 Pre amplifier for microphones
Description
SE Electronics DM2 TNT Pre amplifier for dynamic and tape microphones
Explosive level for all your passive microphones
The DM2 TNT allows you to choose between a moderate gain of +15 dB or +30 dB explosive with an ultra-high impedance input and eight charging settings to perfectly fit any passive microphone.
Recommended use
Dynamic and passive tape microphones
Details
· Switchable, clean and consistent gain from moderate +15 dB to explosive +30 dB
- Eight loading settings ranging from 50 ohms to 10 mega ohms surprisingly high to precisely fit any microphone
- High quality class A and FET sophisticated design specially selected for non-coloring signal boost
- Much lower output impedance and almost half the noise of any other product on the market to raise the level of any microphone clearly.
- The all-metal housing and premium finish ensure that the DM2 can handle demanding lifestyles on tours or in recording/transmission studios.
Gold-plated XLR connector for reliable and lossless signal connection
Power
· Electrical impedance135 ohms
- Recommended load impedance>1k ohms
- Connectivity XLR male/female 3-pin connector
48 V Phantom Power Supply (P48 to IEC 61938)
Sound
Frequency range 10 Hz - 120 kHz (-0.3 dB)
- Win 15 dB / 30 dB
- Current consumption3.1 mA
- Maximum output level (0.5% THD) 9.5 dBV (3.0 V)
Output noise level 1 µV to 15 dB / 6.6 µV at 30 dB
Dimensions
· Preamp diameter 19 mm (0.75 in.)
- Preamp length 96 mm (3.78 in.)
Preamp weight 80 grams (2.82 ounces)
what's in the box
· DM2
- It's Logo Sticker
· User manual with warranty card.
Technical Specifications• Class-A preamp with high quality fets with very low noise• Gain of 15dB or 30dB (selectable)• Impedance adaptation from 50 ohm to 80 mega ohm• Size:• Weight:• Requires Phantom Power +48V
The DM2 TNT active online pre-amp is a new way of precision on the stage and in the studio for your precious dynamic and passive tape microphones. With 8 customizable settings and more gain options
